GINS-PHILIPS UVC Solutions
CONSULTING • DESIGN • MANUFACTURING • INSTALLATION
Philips UV-C-UVGI Lighting solutions effectively inactivate Covid 19 Virus. Ultraviolet Germicidal Irradiation (UVGI) is one of the solutions in effectively improving IAQ and in reducing the risks of airborne virus transmission.
Powered by Philips UV-C Technology
GREEN INSIGHTS SDN BHD
PHILIPS/SIGNIFY UVC/UVGI CERTIFIED PARTNERViruses, bacteria, or fungi are often airborne, spreading through breathing, talking, coughing, sneezing, or any activities which generate aerosol particles or droplets. Virus particles remain in the air for extended periods.
Air disinfection with germicidal light is a well-established technology with demonstrated effectiveness against pathogens. Permanent UV-C installations help provide ongoing defense against the spread of viruses in your public areas.
HVAC / Airflow Disinfection
Air disinfection Solutions (UVGI)
The HVAC systems in indoor spaces, receptions, offices, hospitals, malls etc. re-circulate the pathogens, microbes, virus, etc. along with the cooled air getting re-circulated through HVAC systems. By disinfecting such air in the AHU/air ducts, the Indoor Air Quality can be improved significantly.
A UV-C solution for AHU units
The guide informs the public about ways to improve ventilation and indoor air quality in workplaces, health facilities, residences and public places to reduce the risk of airborne transmission of Covid-19.
Digital control panel with BMS integration capability
Advantages
Key Benefits of UVGI
Deactivates DNA/RNA
UVC to deactivate DNA of any microbe, pathogen, even Covid-19 virus. Thus reducing the potential of airborne spread.
Improved IAQ
Improved IAQ in recirculated air (50%-99% reduction in airborne microbes) for healthier breathing zones.
Coil Biofilm Prevention
No build up of microbial colonies, mold and mildew on the HVAC cooling coils, preserving clean heat transfer.
Safe & Easy Control
Replaceable UV-C light sources designed with safety interlocks, making systems safe to use and easy to control.
Reduced Maintenance
Periodic coil cleaning is not required, saving operational downtime while also significantly improving the coil lifecycle.
Sustainability Value
Expanded Sustainability Value Proposition – 10% Savings on 60% of building’s load due to optimized coil heat-exchange performance.
Safety & Compliance
Enhancing safety and confidence with UV-C disinfection
National ventilation guide guidelines
Malaysia Ministry unveils ventilation guide to reduce Covid-19 airborne transmission
The Human Resources Ministry of Malaysia has released a guide which approved by the National Security Council (MKN) to improve ventilation and indoor air quality (IAQ) at non-residential setting to reduce the airborne transmission of Covid-19.
One of the best practices as a guide to be implemented applies to premises which have mechanical ventilating and air (MVAC) system and spaces without centralized air conditioning system. Ultraviolet Germicidal Irradiation (UVGI) is one of the solutions in effectively improving IAQ and in reducing the risks of airborne virus transmission.
Indirect surface-borne transmission via contaminated surfaces
Our solutions target surface contamination vectors, rendering settled viruses inactive.
Indirect air-borne transmission through air flows
Active airflow treatment inside the ducts stops recirculating viruses from spreading throughout offices.
Case Study: Proven effectiveness on inactivating the virus that caused COVID-19
Signify and Boston University have validated the effectiveness of our light sources on inactivating the virus that causes COVID-19
COVID-19 infections can be caused by contact with contaminated surfaces and then touching facial areas; additionally, it can also be transmitted through air.
The National Emerging Infectious Diseases Laboratories (NEIDL)1 at Boston University in the US have conducted research that validates the effectiveness of Signify’s UV-C light sources on the inactivation of SARS-CoV-2, the virus that causes COVID-19.
During their research they have treated inoculated material with different doses of UV-C radiation coming from a Signify light source and assessed the inactivation capacity under various conditions.
99% SARS-CoV-2 virus reduction on a surface with a dose of 5mJ/cm² in just 6 seconds.
99.9999% SARS-CoV-2 virus reduction with a dose of 22mJ/cm² in just 25 seconds.
- The NEIDL is a state-of-the-art research facility that encompasses significant containment laboratories at Biosafety Level -2, -3, and -4.
- Research variables are available upon request.
Recommendations for UV-C (UVGI)
Bacteria and viruses are transmitted through the air and via surfaces. Research has shown that the germiest air is where people talk (worse where loud talking or shouting occurs), and on surfaces frequently touched by students.
Air disinfection in selected areas
- Spaces that are occupied for extended periods: Classrooms, cafeterias, lobbies, auditoriums, gyms…
Surface disinfection
- Desktops, tabletops, lab benches,…
- Lockers, gym equipment, playground equipment…
Object disinfection
- Cafeteria trays, keyboards, supplies, and areas where possible touchpoints with high possibilities of surface contamination.
Lifecycle Support
Our End-to-End Service Offer
Professional services
The effectiveness and safe application of a UV-C solution starts with the right application design:
- Our lighting design team will analyze with you in which type of areas you want to apply the UV-C solution.
- An audit on type of walls, materials used, fans, and ventilation of these areas can be performed to ensure maximum effect.
- Calculated layout drawings specifying exact position, mounting height, angle and output dosage of UV-C devices.
Staff training & certification
Before your staff operate UV-C devices as part of new cleaning processes, we will provide safety training courses:
- Safety instruction done via our lighting academy to certify installers and facility staff.
- Education on all major aspects of UV-C, its effectiveness, and potential safety risks.
- Practical walkthroughs on how to install, use, and maintain the solutions safely, avoiding exposure.
Lifecycle Services
Like all lighting products, UV-C lamps have a defined lifetime within which they operate at maximum effectiveness:
- Our control systems can monitor and report on lamp burning hours or failures of fixed installations.
- Proactive lamp replacement maintenance notifications to guarantee continuous disinfection power.
- Our service teams plan scheduled visits to install replacement lamps safely and verify active output levels.
